Hello,
I just created an spadnext profile for the recent Aerosoft DHC6 (MSFS2020) for saitek radio panel, multi panel, switch panel only.
How to install
Drag and drop in your documents profile spadnext folder, click activate profile on spad next.
Features:
Radio panel:
All radio panel features works, also I just included the Qnh inner button (press long the transfer button to enable STD baro setting), Transpoder code on XPDR position outter button.
Turn REV ON from autopilot to set radio digits to 100?s TURN REV OFF of you want to set digits of 10?s for radios
Multi panel:
All autopilot features works.
Switch Panel:
start switch mode:
**IMPORTANT** Please begin all of your flights in OFF POSITION.
R position turn ON RIGHT ENGINE
L position turn ON LEFT ENGINE
WHEN ALL ENGINES HAS STARTED PLEASE TURN TO BOTH POSITION
Both position Engine 1 and 2 ready TO GO.
MASTER BATTERY ON: Battery and DC set to ON
MASTER ALTERNATOR ON: GEN 1 AND GEN 2 ON
AVIONICS ON: TRANSPONDER ALT
AVIONICS OFF: TRANSPONDER STBY
FUEL PUMP: ALL FUEL BOOST PUMPS AFT AND FWD TO ON
DE-ICE: DE-ICE BOOTS TO AUTO
PITOT HEAT: PITOT HEAT ON/OFF
CLOSE/COWL SWITCH: PARKING BRAKE ON close position
PARKING BRAKE OFF cowl position
PANEL LIGHT SWITCH
ON: DIM panel lights to 65%
OFF:DIM panel lights OFF
MULTIPANEL
PITCH TRIM WHEEL
NOSE DN
DIM LIGHT CONSOLE, PILOT AND COPILOT INCREASE BRIGHT
NOSE UP
DIM LIGHT CONSOLE, PILOT AND COPILOT DECREASE BRIGHT
ALL LIGHTS ARE WORKING!!!
MINOR FIXES AND NEW IMPLEMENTATION.
*STARTER SWITCH TOGGLE IMPLEMENTED
----NOW WE CAN SEE THE STARTER ENGINE SWITCH MOVING WHEN TURN INTO R / L AND OFF.
*ENGINES START INMEDIATLY AFTER ENGINE SHUTDOWN WHEN BATTERY IS ON* -----NOW FIXED.
----"WHEN BATTERY GOES TO ON AFTER A SHUTDOWN PROCEDURE, BOTH ENGINES WERE STARTING AUTOMATICALLY"---- NOW TURNING BATTERY TO ON AFTER SHUTDOWN, ENGINES WILL BE AT OFF.
---AVIONICS SWITCH:
----ON : TRANSPONDER SET TO ALT MODE
----OFF: TRANSPONDER SET TO STBY MODE
When Battery goes ON : Displays from Saitek Radio Panel & Multipanel goes to ON
-----Battery OFF: Displays from Saitek Radio Panel & Multipanel goes to OFF
---AVIONICS SWITCH:
----ON : TRANSPONDER SET TO ALT MODE
----OFF: TRANSPONDER SET TO STBY MODE
IF YOU WANT TO SUPPORT MY JOB PLEASE CONSIDER TO BUY ME A COFFEE ON THIS LINK -https://www.buymeacoffee.com/afd987K
FOLLOW MY FACEBOOK PAGE : https://www.facebook.com/duquepilot
FOLLOW MY YOUTUBE CHANNEL --DuquePilot - YouTube-- https://www.youtube.com/channel/UCwOXPm9-hAWv3--LEkGdzWQ/featured
THANKS AND HAPPY FLIGHTS FOLKS!!!
juancami
Magnifico trabajo, tengo otros dispositivos no saitek, como encuentro los LVAR en Spad.next para asignar funciones?
anfedu author
Hola, gracias por tus comentarios, en este canal oficial del DEV de SPadnext encuentras toda la info que necesitas para iniciarte en el mundo de la programación Spadnext - Les O'Reilly - YouTube- por políticas de la pagina no se permite poner el enlace URL.
2 years ago
Phoenix
Hi,
I have to put the Virtual power to off if i want to use it, even if i do a cold start.
When I use Flaps up /down, it will extend or retract 2 levels.
I'm using a FMP.
anfedu author
Hello, thanks for your comment, let me know more info about the issue, Just to remind you this profile is only for saitek , multipanel / proswitch panel/ and Radio panel. if you are using other inputs this profile maybe works with some issues.
always is better if you remove all saitek drivers from your computer spadnext will be buggy with those drivers installed, let spadnext works by own drivers.
flaps lever are working fine!
greetings from medellin colombia.
2 years ago
pepe005
hola.. gracias por tu aporte....
es el mejor perfil que he encontrado para los paneles de saitek..
gracias por tu ayuda.
anfedu author
Con mucho gusto y que lo disfrutes! Espera próximamente el cessna 414aw de fly sim ware, y algunos ajustes a este perfil.
cualquier inconveniente que encuentres avísame por favor para actualizarlo.
2 years ago