AXIS and OHs Scripts to use for VRinsight MCP Combo II with templates
Here is a new template and script to make perfect use of your VRinsight MCP Combo II with PMDGs B737 (all models). You will need AAO and the AAO VRinsight MCP Combo II Bridge. Get it from here.
The following profiles are provided:
PMDG Boeing 737 (600/700/800)
- PMDG 737.tmpl (import in AAO for button assignements)
- B737-VRiBridge.txt (for your convinience codes for displays in txt format)
- AAO_VRI_Bridge_DisplayProfiles.xml (import in AAO Bridge via import function)
- B737 AxisAndOhsScripts.xml (import in AAO ->scripting->import scripts)
ADDITIONAL MAIN DISPLAYS:
B737 FLIGHTPLAN INFO:
Indication of PREVIOUS Waypoint
Indication of NEXT Waypoint with ETE, Distance and Bearing
Indication of ETE to DESTINATION
B737 TEMPERATURE DISPLAYS:
Indication of TEMPERATURES according to the SOURCE SELECTOR on OH (status is also displayed)
Indication of TEMPERATURES of OAT and TAT
FREQUENCY DISPLAYS:
COM: 1st Layer-WINDDIR/VELOCITY
2nd Layer-HEAD-/TAILWIND COMP (changes accordingly)
NAV: 1st Layer-TIME ZONES
No second layer for now due to unreadability of CHRONO and ET of the PMDG (if someone knows how, pls let me know)
ADF: 1st Layer-INDICATION GS/IAS und TAS
2nd Layer-INDICATION MACH/GND SPEED in km/h
DME: 1st Layer-VOR 1 with NAME CODE, DIRECTION, DISTANCE and TIME to VOR
2nd Layer-VOR 2 with NAME CODE, DIRECTION, DISTANCE and TIME to VOR
TRN: 1st Layer-TRANSPONDER CODE and TRANSPONDER NUMBER active (change active XPNDR via AUX button, CODE via ROTARY)
2nd Layer-XPNDR ALT SRC (change via AUX) and TCAS MODE (change via ROTARY)
You can assign a button on the MCP (or your Streamdeck, Joystick etc.) where you will be able to toggle through the different screens by assigning AAO_VRI_TOGGLE_PAGE (found under Simulator Event/AAO VRI Bridge). See also VRI Bridge Manual !
With this template you get full control with the MCP Combo II and complete LCD readouts for your Autopilot functions. (SPD, HDG, ALT, V/S etc.) Also LCD indication changes with different stats like autobrake/GS etc.
The complete set of B737 scripts for AAO is included...
All assignments could be changed also of course. For importing templates and change assignments, please consult the AAO manual!
ATTENTION:
Due to your device might have a different hardware ID in AAO than that device it was created on, you have to change all assignments to your device. Therefore just doubleclick on each assigned button and change ONLY the input to your devices respective button/switch !!!!
For questions just join my discord server as there it is much easier to help and support you. Please send comments and suggestions and also consider a donation to keep up the work. Thank you and enjoy!
Discord server: https://discord.gg/9gZj5Ec6nj
YouTube: https://www.youtube.com/@ChrisPUA320
jandiek
COM -> i can change : 123.800 to 124.800 but not the the freq. after the mag point
trn: -> i can only change the first number 1234 to 2234 or 3234 but not the second or third number
Chris_PU_A320 author
4 months ago
jandiek
Problem 1:
Speed knob works finde but on the screen is always 000, same with V/S-> knob works finde but screnn ->0000
Problem 2:
CMD L knob works for 2 seconds-> it activated the cmd but after 2 seconds it is deactiveted.
Key Down event: #70034 (EVT_MCP_CMD_A_SWITCH)
Problem 3:
Gear knob work fine but nothing is happend. Gear up -> But the Gear is down
Key Down event: script:B737-GEAR UP OFF (RPN)
Problem 4:
Flaps -> the GEar up switch, dont switch Flaps -> it switch the Fuel pump (all)
Key Down event: FLAPS_CONTINUOUS_DECR // dosent matter , i checked all Flaps Event
i hope you cann help me
Chris_PU_A320 author
4 months ago
Tomfal
I have Version 1.6.1. It shows me the SPD in MACH -> .00 - How can I switch to knots?
Chris_PU_A320 author
With the PMDG there is no way to change between MACH/IAS manually. It should change automatically according to the MCP in the VC. If you still having issues pls join my discord server for support.
rgds
Chris
1 years ago
jftejeiro
the screens of the mcp combo II appear to me with values 000 in SPD HDG ALT V/S The rest of the buttons work fine for me.
Chris_PU_A320 author
It should work fine. Just check your AAO Bridge if the correct profile is loaded and the MCP Screen shows correct values...do the values change when rotating buttons?
if you need more assistance just join my discord server...
2 years ago