AXIS and OHs Template/Scripts to use for VRinsight MCP Combo II for iniBuilds A310
Here is a template and scripts to make perfect use of your VRinsight MCP Combo II. You will need AAO and the AAO VRinsight MCP Combo II Bridge. Get it from here.
The following files are provided:
- A310-300.tmpl (import in AAO MAIN program for button assignements)
- A330-VRiBridge.txt (for your convinience codes for displays in txt format)
- AAO_VRI_Bridge_DisplayProfiles.xml (import in AAO Bridge via import function)
- A310_SCRIPTS_ONLY.xml (import in AAO ->scripting->import scripts)
With this template you get full control with the MCP Combo and complete LCD readouts for your FCU.
All assignments could be changed also of course. For importing templates and change assignments, please consult the AAO manual!
ADDITIONAL MAIN DISPLAYS
A310-300 FLIGHTPLAN INFO:
Indication of PREVIOUS Waypoint
Indication of NEXT Waypoint with ETE, Distance and Bearing
Indication of ETE to DESTINATION
A310-300 TEMPERATURE DISPLAYS:
Indication of TEMPERATURES of Cockpit, Cabin FWD, Cabin MID, Cabin AFT
Indication of TEMPERATURES of Oil, EGT, OAT
FREQUENCY DISPLAYS:
COM: 1st Layer-WINDDIR/VELOCITY
2nd Layer-HEAD-/TAILWIND COMP (changes accordingly)
NAV: 1st Layer-TIME ZONES
2nd Layer-CHRONO und ET (FBW)
Start/Stop via TFR/AUX ("R" indicates RUN)
Reset with Rotary (left or right turn, choose with PUSH function (Cursor) )
ADF: 1st Layer-INDICATION GS/IAS und TAS
2nd Layer-INDICATION MACH/GND SPEED in km/h
DME: 1st Layer-VOR 1 with NAME CODE, DIRECTION, DISTANCE and TIME to VOR
2nd Layer-VOR 2 with NAME CODE, DIRECTION, DISTANCE and TIME to VOR
TRN: 1st Layer-TRANSPONDER CODE and MODE (change MODE via AUX, CODE via ROTARY)
2nd Layer-TCAS TRAFFIC and TCAS POS (change MODE via TFR and AUX)
You can assign a button on the MCP (or your Streamdeck, Joystick etc.) where you will be able to toggle through the different screens by assigning AAO_VRI_TOGGLE_PAGE (found under Simulator Event/AAO VRI Bridge). See also VRI Bridge Manual !
ATTENTION:
Due to your device might have a different hardware ID in AAO than that device it was created on, you have to change all assignments to your device. Therefore just doubleclick on each assigned button and change ONLY the input to your devices respective button/switch !!!!
For support just join my discord server as there it is much easier to help and get you support. Please send comments, issues and suggestions and also consider a donation to keep up the work. Thank you and enjoy!
Discord server: https://discord.com/invite/9gZj5Ec6nj
YouTube: https://www.youtube.com/@ChrisPUA320
dann1357