Partly english cockpit for the Bear Studios Mig-15Bis, plus bug-fixes
######## UPDATE #########
SP1 compitability (removed vapour trail fix)
added more labels
###### END UPDATE ########
Some users are having problems getting it to work
e.g. when repaints are installed or SU12 Beta is in use
A) Try renaming the installed folder zzz-kjb-cockpit-mig15
B) Copy the DDS files in the <MSFS>\Community\kjb-cockpit-mig15\SimObjects\Airplanes\BS_MiG15Bis\texture folder into the texture<?> folder of the repaint
C) If you are happy to have these changes in ALL liveries then copy the DDS files in the <MSFS>\Community\kjb-cockpit-mig15\SimObjects\Airplanes\BS_MiG15Bis\texture folder into the <MSFS>\Community\bearstudios-aircraft-mig15bis\SimObjects\Airplanes\BS_MiG15Bis\texture folder
---------------------
A light touch - with just the ASI converted to Kts, with a scattering of impact-labels on important switches and bulbs to assist non-russian speakers but retaining all original labels.
The ASI has a red triangle to indicate the gear and flaps down stall speed and a yellow triangle to indicate rotation/touch-down speed, but take weight and weather into account in their use!
Also a white arc for safe gear and flaps deployment.
To use the labels, e.g. the short-start sequence from the manual, with labels referenced as [label]:
Before starting is attempted, all switches should be turned off (aft), the throttle (16) closed, and the high-pressure fuel valve (fuel cock lever, 11) [lever below throttle near floor] closed (up).
To start the engine,
a. Turn the following switches “on” (forward):
(1) Engine instruments (29) [ENG INST]
(2) Ignition isolator (28) [IGN]
(3) Rear (Aft) tank transfer pump (32) [XFR]
(4) Booster pumps for start and engine running (30) [BST]
b. When the low-pressure fuel warning light (70) [LOW P] goes out,
press starting button (15) [black button under silver guard, left of throttle] for five seconds and release it.
After approximately 10 seconds (the engine speed will be 800 – l, 000 rpm), start to open the high-pressure fuel valve (fuel cock lever 11) slowly (down).
As the engine accelerates, open the valve to the full open position.
The engine will automatically accelerate to an idling speed of 2500 rpm.
c. The re-light warning light (59) [RLT] will be on during the automatic starting cycle.
When it goes out, turn on the generator switch (85) [GEN] and the battery switch (84) [BAT].
Then disconnect the GPU or battery cart.
----------
To jettison drop tanks
1, Move DRP switch (right console) forwards
2, Open the red guard, lower panel in front of stick
3, Press the unguarded button
—---------
A couple of typos are fixed on the kneepad.
The aberrant vertical g-trails are removed
==============
To install just copy the contents of the zip file into your Community folder.
To uninstall just delete the installed folder
tomzah
Running beta 12 here.. It does not work.. 0r I cannot get it to work.
keithb77 author
What doesn't work?
1 years ago
Spook48
Very usable, thx