Version 2.0 changed GPS texture in panel file
Version 1.0 First release
This is the Livery of the D-FONE (former "Red Baron2" from Air Albatros).
There where two AN-2 with the same registration and similar color scheme.
D-FONE (Red Baron), scenic flights with Air Albatros in the german Ruhr Area, damaged in 2003 at a forced landing, repaired but finally destroyed by intentional arson in 2004.
Following that the An-2 D-FKMD was re-registrated as D-FONE (Red Baron 2) in 2005 and repainted with same color scheme as former D-FONE.
This aircraft was later sold to Michael Manousakis / Morlock Motors where it appeared first time in 2017 at the german TV show "Steel Buddies" (Season 5 Episode 13).
Hope I got everything right...
I created the paint scheme inspired by this first Morlock appearance.
The red sides inside the cockpit were a bit reduced, because this red color looked very cheap and made me crazy during test fligths.
Because of the in the german Ruhr Area well known "Red Baron" version, I left the name below the cockpit windows.
For the delivery to Morlock Motors they were removed from the real plane.
The livery is for the "_NEW" Version only as the original plane is equiped with the new Cockpit and cabin layout.
So I thought it doesn't make sence to bring it onto the "old" version of AN-2.
The original plane has german descriptions in the cockpit. Sorry I wasn't able to change the cyrillic lables with this livery.
Installation:
If You already installed a version of this "Antonov AN-2_D-FONE" please delete the old version from comunity folder.
Then just copy new the "Antonov AN-2_D-FONE" folder in your "comunity" folder and start MSFS.
You are ready to have fun...
It looks very simple, create a red plane and put some stripes on it.
But in real it was a tremendous work to setup all the connections of surfaces pixel by pixel.
Also a lot of small parts had to be found in the drawing template and painted in the correct color.
That's a lot of try and error, and again reload plane, and check, and change, and check...
So a "Like" won't go miss... Thank You! (Well, I hope, You like it...)
Thanks to ASOBO and ATS for the Antonov. It is a great work and It was realy worth waiting for it.
Thanks to Popele3 for disabling the original model tail number.
Special thanks to all painters who provided a lot of good ideas, inspirations and beautiful templates.
And thanks to my wife. Sorry, I did it again...
++++++++++++
Version 2.0 geändere GPS Textur im panel file
Version 1.0 Erste Version
Das ist eine Livery der D-FONE (früher "Roter Baron2 von Air Albatros).
Es gab tatsächlich zwei Flugzeuge mit der Kennzeichnung D-FONE und der selben Lackierung
Die erste D-FONE ("Roter Baron") wurde für Rundflüge von der Air Albatros im Ruhrgebiet verwendet.
Allerdings wurde die Maschine 2003 bei einer Notlandung schwer beschädigt und schließlich 2004 durch Brandstiftung zerstört.
Daraufhin hat Albatros 2005 eine weitere AN-2, die D-FKMD als D-FONE ("Roter Baron 2") umregistriert und mit der selben Lackierung wie die vorige D-FONE ausgestattet.
Später wurde sie an Michael Manousakis / Morlock Motors verkauft, wo sie 2017 ihren ersten Auftritt in der Serie "Steel Buddies" hatte (Staffel 5 Episode 13)
So. Ich hoffe ich habe alles korrekt wiedergegeben...
Ich habe mich von der neuen Morlock Version für dieses Repaint inspirieren lassen.
Die seitlichen rot gefärbten Cokpitwände habe ich im oberen Bereich wieder schwarz gefärbt. Es sah irgendwie stümperhaft und billig aus. Abgesehen davon hat mich die rote Farbe bei den Testflügen wahnsinnig gemacht...
Da die D-FONE vor allem im Ruhrpott als "Roter Baron" bekannt geworden ist, habe ich die Schriftzüge beibehalten.
Vor der Überstellung an Morlock Motors wurden die Schriftzüge am realen Flugzeug entfernt.
Diese Livery ist nur für die "_NEW" Version, da das Originalflugzeug mit dem moderneren Cokpit und Bestuhlung in der Kabine ausgestattet ist. Für mich hätte eine Konvertierung für die "alte" AN-2 Version irgendwie keinen Sinn ergeben.
Die originale Maschine hat im Cokpit Deutsche Beschriftungen. Sorry, das konnte ich leider hier nicht umsetzen.
Installation:
Falls bereits eine Version dieser "Antonov AN-2_D-FONE" installiert war, bitte den alten Ordner im Comunity Ordner löschen.
Dann den neuen "Antonov AN-2_D-FONE" Ordner entpacken und in den Comunity Ordner des MSFS kopieren.
Fertig...
Es sieht an sich aus wie eine einfache Aufgabe. Mache ein rotes Flugzeug und male ein paar Streifen drauf.
Isses aber nicht. An den Verbindungsstellen mussten alle texturen Pixel für Pixel aneinander angepasst werden.
Dazu kamen sehr viele kleine Einzelteile, die in den Templates gefunden und entsprechend bemalt werden mussten.
Sehr viel "Try-and-Error", Flugzeug laden, Textur prüfen, Textur ändern, neu laden, neu prüfen usw...
Ich würde mich also über ein "Gefällt mir" sehr freuen. (Und ich hoffe diese Livery gefällt...) Danke!
Danke natürlich auch an Asobo und ATS für die Antonov. Es ist eine großartige Arbeit und ich habe mich lange darauf gefreut.
Danke an Popele3 für das ausblenden des Kennzeichens.
Besonderen Dank auch an all die Painter, die neue Ideen, Inspirationen und sehr schöne Vorlagen erstellt haben.
Danke auch an meine Frau. Tut mir leid - ich habe es wieder getan...
simchanneldeluxe
Viele Grüße
Onzka
https://rundflug-ruhrgebiet.de/
Jordish author
6 months ago
jetpilot82
könntest du dein Paint an die neue Version der Antonov anpassen? Seit dem letzten update ist das GPS Display nur noch weiß (andere Paints funktionieren)
vielen Dank 😊
Jordish author
Hallo,
Das liegt an meinem Panel File zur Unterdrückung der Tailnummer.
Ein Update folgt in Kürze.
Schnelle Lösung für jetzt gleich:
MSFSPackages\Community\Antonov AN-2_D-FONE\SimObjects\Airplanes\
Microsoft_Antonov2_Wheels_New_D-FONE\panel.D-FONE
Panel Datei mit Texteditor öffnen, die folgenden Bereiche überschreiben und Datei speichern:
[VCockpit02]
size_mm = 350,190
pixel_size = 350,190
texture = $AS430_Screen
htmlgauge00=NavSystems/GPS/AS430/AS430.html?Index=1, 0, 0, 350, 190
[VCockpit03]
size_mm = 320, 234
pixel_size = 320, 234
texture = $AS530_Screen
htmlgauge00=NavSystems/GPS/AS530/AS530.html?Index=1, 0, 0, 320, 234
1 years ago
fStopper
Beautiful inside and outside and for both versions on top of that. Thank you!!!
muthi
Perfekt !!! Wunderbar und Dankeschön für dein Bemühen !!!! Super geworden das Ding, Danke !
Jordish author
Danke! freut mich! :-)
1 years ago
Willowfsx
Hallo Jordish,
genau da fangen die Probleme an: "Mach einfach ein paar Streifen drauf". Und dann will es hinten und vorne nicht passen. Du lädst den Flugsimulator ein ums andere Mal. Und wieder passt es nicht. Da werde ich immer ganz wild und denke irgendwann: Laß es jetzt gut sein. 90 Prozent reichen auch. Für die meisten Nutzer ist das auch völlig okay. Für die ganz Harten wären 105 % besser.
Aber so ist das Leben. Ich habe manches Mal mit mit nicht so "guten" Liveries viel viel mehr Downloads als mit den "perfekten".
Herzliche Grüße aus dem Westerwald
Willowfsx
P.S.
Ich tue es auch immer wieder
Jordish author
Dem ist nichts hinzuzufügen! :-) Danke
1 years ago
Bluebear
Wow, great job,
Now i can made some nice sightseeing flights above the " RuhrPott" area with a very nice appropriate repaint.
I highly recommended the freeware airports from Christian Bahr
as airbases for the D-FONE.
https://de.flightsim.to/file/51183/regional-airport-dortmund-edlw
and
https://de.flightsim.to/file/51340/flughafen-essen-mlheim-edle
Thanks a lot Jordish for this great repaint
and greetings from the Ruhrpott to your understanding wife 😉
Jordish author
Thank You! I really appreciate that!
1 years ago
easyraider1960
Danke Schön!!! super geworden..........
habe allerdings auf die Version ohne GPS umgestellt,
und die Asobo Tailnummer auch entfernt.......
Jordish author
Danke! Aber Frage: gab es bei Dir Probleme mit der Aosbo Tailnummer? Die sollte außen eigentlich nicht mehr angezeigt werden...
1 years ago