GSX PRO NEXTGEN BANDEIRANTE EMB110 AIRCRAFT PROFILE
The Embraer EMB 110 Bandeirante (English: pioneer) is a Brazilian twin-turboprop light transport aircraft designed by Embraer for military and civil use. The EMB 110 was designed by the French engineer Max Holste; it had been designed in line with specifications issued by the Brazilian Ministry of Aeronautics in 1965. The goal was to create a general purpose aircraft, suitable for both civilian and military roles with a low operational cost and high reliability. On 26 October 1968, the YV-95 prototype performed its maiden flight; an additional two EMB 110 development aircraft would follow along with an initial order for 80 transport aircraft for the Brazilian Air Force in the following year. Type certification was received from the Brazilian aviation authorities in late 1972, permitting its entry to service in April 1973 with the Brazilian airline company Transbrasil.
Various customers in both the military and civilian sectors opted to procure the EMB 110 during its 22 year production run. Over one hundred examples would serve with the Brazilian Air Force, who would modernise numerous examples during the twenty-first century to permit their continued operation. The EMB 110, being customisable to suit various roles and operator requirements, was adapted for various specialist roles, including aerial observation, maritime patrol, and search and rescue missions. During the 1970s, Embraer opted to design an enlarged derivative of the EMB 110, designated as the EMB 120 Brasilia; being faster, outfitted with a pressurized cabin, and able to accommodate up to 30 passengers, Embraer opted to concentrate its resources on the new aircraft. As a result, production of the EMB 110 was terminated during 1990. To learn more about this aircraft click on the link below:
*** INSTRUCTIONAL DOWNLOAD INFORMATION ***
Thank you for downloading my NextGen Embraer Bandeirante EMB110 Aircraft Profile for GSX Pro. This Profile was created using NextGen's EMB110 Aircraft below:
NextGen Embraer Bandeirante EMB110 Aircraft
To install this GSX Pro Aircraft Profile into your sim all you need is 7-Zip, WinRar, or any type of zip/unzipping software. Using either 7-Zip or WinRar will decompress the other without any problems. Once the folders is decompressed you can then copy the decompressed folders into the GSX Pro Folder below:
%Appdata%/virtuali/Airplanes
To access this folder on your computer simply hold down your "Win" key whilst pressing the "R" key on your keyboard. This will bring up a Command Line Run box where you can copy the above underlined text into it. This will open your GSX Pro folder where your DEFAULT Aircraft Profiles are kept, that's it!
Once again you can find ALL my GSX Pro profiles for Aircrafts & Airports in the LINK below:
PantherConsult GSX Pro Profiles for Aircraft & Scenery
And as usual, please "Comment", "Rate", and "Like" the profile that I created to bring to you this wonderful and immersive GSX Pro Aircraft Profile.
*** NOTE: ONLY FOR AIRCRAFT THAT DO NOT HAVE AN EFB TO CONTROL PASSENGER NUMBERS:
One of the things that help with immersion with ALL Simulator Aircraft are the payload settings, for you to get the most PAX on an aircraft when boarding and deboarding you need to set the payload settings in the sim for these aircraft to 100%. You can save these settings by pressing "Save" and giving it a name or leaving the default name given to the file generated. If not done, the most you will see boarding and deboarding - in most aircraft that do not have an EFB to allow for Passengers, would be approximately 1 - 4 passengers. With this setting set to 100% you'll get the max PAX payload that the aircraft can accomodate. REMEMBER to do this, or your simulation immersion will be hindered to the lesser load of the aircraft.
**** IMPORTANT ****
When using this profile please make sure that the nose-wheel of the aircraft is always on top of the Parking Slot "Stop Here" line. If the aircraft is not on that line then re-position the aircraft so that it is. You can do that by using the GSX Main Menu, choose 0 - Reposition aircraft and then choose 1 - Reposition here at current gate. Also, if that does not work you can always start from the runnway and reposition the aircraft from there to the Parking Slot you want to relocate your aircraft to.
"Fly High, Fast and Safe Landings!"
ENJOY!
PantherConsult