Streamdeck SD+ profile for the FlightFX Vision Jet G2+ (SF50)
Please read the included manual ( VisionJet_SDPlus_manual.pdf ) for further instructions and important informations on how to setup the jet to work properly with the SD+ profile.
ATTENTION:
- You need the AAO / Axis and Oh's software and the AAO plugin for Streamdeck
- Please remove any old version of this streamdeck profile before installing a new version.
- Install the AAO scripts by importing the VisionJet_AAO_Scripts.xml file in the AAO software.
- Install the SD+ Streamdeck profile by double click on the Vision Jet G2+.streamDeckProfile file.
The following functions are coverd in the profile:
"Elec(tronics) & Air" Startup Page for bringing the jet out of cold & dark (Step1) Actions for:
- BAT1 on/off
- BAT2 on/off
- GEN1 on/off
- GEN2 on/off
- Strobe Light on/off
- Landing Light on/off
- GPU Support on/off
- Checklist scroll and check
"Start Up" Page 2 Actions for:
- Starter switch to Run/off
- Engine start (off not working at the moment)
- ECS Disable on/off
- GPU on/off
- Oxygen Supply on/off
- Fresh Air/Bleed on/off
- Probe Heat on/off
- Checklist scroll/check
- N1% info
- N2% info
- BARO setting and STD switch
"Lights/Deice" Page Actions for:
- Strobe Light on/off
- Landing light on/off
- ice/wing light on/off
- Engine deice on/off
- Wing/Stab deice on/off
- Windshield deice on/off
- Checklist scroll/check
- BARO set/STD Switch
"COM & MAP" Page Actions for:
- Transponder status
- Vatsim Unicom 122.800 preselect for COM1 standby
- direct link to Autopilot page
- COM1 active/standby frequency info and xfer
- COM1 standby Mhz change via rotary
- COM1 Khz change via rotary
- Map scrolling up/down/left/right via Multi-Level-Rotary
- Map Zoom/Panning select/activation via rotary
"Landing final" page for the last miles to the runway Actions for:
- APR mode button on/off
- Gear status/up/down
- Landing light on/off
- AP speed increase in +1 and +5 kts steps
- AP speed decrease in -1 and -5 kts steps
- COM1 active/standby info & xfer (I usually have tower on active and grnd on stby at final)
- checklist check
- COM1 standby Mhz change via rotary
- COM1 standy Khz change via rotary
- Map scrolling up/down/left/right via Multi-Rotary
- Map Zoom in/out & "move/swipe" mode activation for scrolling feature - (the zoom is nice to get to the "airport" level for taxiing or to zoom and scroll on the navigraph charts)
"Autopilot" Page Actions for:
- AP on/off
- Autothrust on/off
- Autothrust FMS/MAN mode
- FLC mode on/off
- HDG mode on/off
- NAV mode on/off
- VNV mode on/off
- ALT hold on/off
- HDG change rotary with sync feature
- Speed change rotary
- Altimeter change rotary with sync feature
- VS rate change up/down with activation feature rotary
"VAMS/Exterior/Other" Page Actions for:
- Preflight/Exterior Actions Folder
- Automatic noise reduction on/off
- V.A.M.S. tablet open/closed
"Preflight/Exterior" Page for:
- Cabin door open/close
- Covers on/off
- Luggage door open/close
- V.A.M.S. tablet open/closed
- Headphones on/off
- Chocks set/removed
- Luggage Setting Page
"Lugagge Setting" Page:
- Control the loaded luggage for family vacation, snowboard trip, golf trip and empty compartment
This is my first SD+ profile and I still have some things to implement and I also have to refine the graphics. But I thought you might want to give it a try. Please report bugs and ideas and positiv feedback via comments. Thank you and happy flying.
myloder
Gabe777
Could the "Back" button (lower left) be made into the APR button... but have a small arrow top left of key display... with LONG PRESS for "Back" ?
OR: Vert Speed display has room on right for 'Press Window' command to Activate APPR ?
Don't know if can be done ... ?
Also... I like the Landing Page in principle, but maybe find room for the Man/FMS speed control toggle.
Speed up and down is only useful if you've switched to Manual control on Approach.
👍
isiFlying author
5 months ago
Gabe777
More improvements.
zbootsum
isiFlying author
6 months ago
Gabe777
Changing FMS and Manual speed to the Speed Dial button press, would free up a button spot for APR.
Would need room in the window above for FMS or MAN to green up.
Cheers 👍
isiFlying author
6 months ago