Oliver's SPAD.next profile for the FlightSim Studios E170/175 and Honeycomb Bravo
This profile provides correct throttle configuration including reverse thrust via the throttle detents, as well as autopilot, lighting, and miscellaneous controls.
Make sure you have SPAD.next version 0.9.16.4 or later. If you have issues with this profile, please do not submit support tickets to SPAD as they will not help with 3rd party content.
VERY IMPORTANT: set up your throttle calibration, including the detent ranges and dead zones (on the airplane's tablet) EXACTLY as shown in the included screen shot. If you don't match your airplane's throttle configuration to my screen shot it won't work!
Installation: Drop the xml file into your Documents -> SPAD.neXt -> profiles folder, then run SPAD and assign the profile to your airplane.
Here are the settings:
Lever 1: Spoilers
Lever 2: Not used
Lever 3: Left Engine
Lever 4: Right Engine
Lever 5: Not used
Lever 6: Flaps
Pull throttles down into the detents for full reverse thrust.
Button 30 (TOGA on Bravo stock airliner throttles): toggle auto-throttle on/off
Autopilot Buttons:
HDG: Heading Mode (short press); Heading Sync (long press)
NAV: Nav Mode
APR: Approach Mode
REV: FPA Mode (long press). The short press action is reserved for VNAV when that feature is implemented.
ALT: Altitude Hold (short press); toggle between 100 and 1000 foot increment when selecting altitude via the rotary encoder (long press)
VS: Vertical Speed Mode
IAS: Flight Level Change Mode
AP: Engage/disengage autopilot
Rotary Encoder - different actions depending on position of function selector knob. This works as expected to change altitude, heading, course, and airspeed; except for when the function selector is set to VS the encoder will change vertical speed if the airplane is in vertical speed mode or FPA angle if the airplane is in FPA mode.
Flap Toggle Switch: switches cockpit dome light on (up) and off (down)
Toggle Switches (left to right):
Beacon
Landing Lights
Taxi Lights
Nav Lights
Strobe Lights
Seat Belt Sign
Parking Brake
Landing Gear switch and lights work as expected.
I have not bothered with the annunciator lights. I find that I never look at mine anyway.
SUPERCHARGED458
pilotboy86
JetNoise
Oliver 😉