Wing42 B247D StreamDeck XL Profile
for LORBYs AxisAndOHs (AAO) and its SD Plugin
by Guenseli
You need LORBYs AAO and its StreamDeck Plugin to run this StreamDeck profile.
ATTENTION!
PLEASE READ CAREFULLY!
- When you import SD profiles, make sure to delete the old ones, otherwise you'll get profile copies.
- Make sure to always have the latest AAO and AAO StreamDeck plugin versions!
- I just create the SD profiles! For any connection issues, SD plugin not working, Buttons show "?" or nothing, no reaction of the SD etc., please contact the developer of AAO! And please read the AAO Manual!
- It is - as the title says - just for the StreamDeck XL (!). Please do not ask for a 15 button conversion. This will not happen as this will more than double the amount of development and support for me as I do not have a 15 button SD. Sorry.
- Please ask if you want to use parts of my SD profiles, icons or AAO scripts or whatever! And please ask everytime you start a new project! You have to credit and link me in your description!
If you use my work, you are then not allowed to beg for own donations!
Features:
Many gauges to keep the engine parameters in sight (with little cheating as I have added little markers)
Right side fuses box which shows burned fuses also (click to change fuses)
Radio navigation gauge, which shows A and N signal strength
Engine start completely with StreamDeck possible
Tap on manifold pressure gauges to select left and right MP gauge in the VC
Installation:
Install the SD profile by double clicking at Wing42 B247D.streamDeckProfile
Import the AAO script AxisAndOhsScripts_B274D.xml according to the AAO manual
Known issues:
Some switches need one or more presses to initialise
Radio fuses are not integrated - will come later
Fuse box open/close will come later
AAO Scripts are in cooperation with "Funatic"! thx for helping me!
It is a lot of work to do these icons and gather the variables. If you like it, please consider a little donation, thx!
rogerabram
This is truly awesome! Thank you!
Guenseli
If you have greyed out buttons, no reaction of the StreamDeck, exclamation marks etc, that means you have connections issues between AAO and the StreamDeck.
94% of all support request are due to no proper connections or outdated versions of AAO and/or the AAO SD plugin.
Check ports, check the troubleshooting PDF, contact AAO support.
My Streamdeck profiles work (beside from probably little bugs). If you have such issues, I can't help you, sorry! Support requests can't not solved by me as I'm not the developer of AAO!
Bloodhound123
I don't want to use StreamDeck but i would like to use rotary encoders on my Hotas to control levers in the cockpit, for example carburetor heat.
I tried using the "Change" script for the Carb heat, but it only moves the lever up, and don't know what to do to move it down. Using the "Set" script resets the lever to the lowest position. I don't want to use an axis for this, i only have a limited number of sliders or knobs, but i have a lot of rotary encoders that i can use.
Can you please explain what i can do to move the carb heat downwards?
Thank you.
Guenseli author
You should have two directions on your rotary ... you assign one to CHANGE +1 and the other to CHANGE -1
Do this by turning the mousewheel on the "ROLL" field in the "add button assigment" window on the upper right
2 years ago
Emotionfan
Hello, thank you for this work. I am happy to find it. On my steam deck i can't see some buttons. They are only grey. Must I load the pictures for the buttons somewhere else?
Guenseli author
No, that means you have no connection to AxisAndOHs or a very old version of the plugin or AAO
Please refer to the AAO manual or contact the developer of AAO.
i just make the SD pofiles
2 years ago
gordongreig
Great mod, thank you so much. Any chance you can do something for the cabin/dome lights and also the light potentiometers? Struggling with those. Also, I can't get the increment/decrement magneto scripts to work. Any suggestions?
Guenseli author
Hello,
thanks for your donation!
I haven't had luck with the cabin/dome lights. I even do not find the switches in the VC? I have to contact the developer, but will give him a bit of time as he is very busy right after release.
Same with magnetos. As in the "known issues" said, they are not animated, but the StreamDeck animation works and shows the correct state.
Hope we could them to get working one day
2 years ago